WELCOME TO OUR ONLINE STORE !

MikroTik RouterBOARD SXTG 5HPacD-SA Dual Chain 5GHz 802.11ac, Sector/CPE, 90Deg, 13dBi, MIMO, L4, Gigabit PoE

More Views

MikroTik RouterBOARD SXTG 5HPacD-SA Dual Chain 5GHz 802.11ac, Sector/CPE, 90Deg, 13dBi, MIMO, L4, Gigabit PoE
R2,380.59

Availability: In stock

MikroTik RouterBOARD SXTG 5HPacD-SA Dual Chain 5GHz 802.11ac, Sector/CPE, 90Deg, 13dBi, MIMO, L4, Gigabit PoE
Description

Details

The new AC standard is here, with up to 866Mbit over the air datarate, 256-QAM modulation, and 80MHz channels. 802.11a/n/ac opens up new possibilities and speeds never possible before.

The SXT ac is a new member in our 802.11ac product lineup, currently two models are available — with regular 28 degree antenna, and the SA model with a 90 wide beam - width sector antenna. Also support 802.11a/n standard, Nstreme and Nv2 protocols and are compatible with all legacy RouterBOARD devices.? Both devices come with Gigabit Ethernet.

New products are backwards compatible - for example, you can replace your 5GHz 802.11a/n legacy Access Point with new 802.11ac product and your existing customers will still be able to connect to it.

SXT install guide: 

- RBSXTG-5HPacD-SA-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

- RBSXTG-5HPacD-SA (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

 

Specifications

Details
Product code RBSXTG-5HPacD-SAr2
Architecture MIPS-BE
CPU QCA9557
CPU core count 1
CPU nominal frequency 720 MHz
License level 4
Operating System RouterOS
Size of RAM 128 MB
Storage size 128 MB
Storage type NAND
Suggested price $119.00

Powering

Details
Max Power consumption 12W
Number of DC inputs 1 (PoE-IN)
PoE in 802.3af/at
PoE in input Voltage 12-57 V
Supported Voltage 15-60V

Wireless

Details
Wireless 5 GHz number of chains 2
Wireless 5 GHz standards 802.11ac
Antenna gain dBi for 5 GHz 14
Wireless 5 GHz chip model QCA9892

Ethernet

Details
10/100/1000 Ethernet ports 1

Peripherals

Details
Number of USB ports 1
USB Power Reset Yes
USB slot type USB type A

Other

Details
PCB temperature monitor Yes
Voltage Monitor Yes

Wireless specifications

5 GHz Transmit (dBm) Receive Sensitivity
6MBit/s 31 -96
54MBit/s 28 -81
MCS0 30 -96
MCS7 27 -77
MCS9 22 -72

Ethernet test results

RBSXTG-5HPacD-SAr2 QCA9557 1G all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 81.2 986.1 234.9 962.2 477.7 244.6
Bridging 25 bridge filter rules 81.2 986.1 118.4 485.0 119.5 61.2
Routing none (fast path) 81.2 986.1 234.9 962.2 408.2 209.0
Routing 25 simple queues 81.2 986.1 158.3 648.4 165.8 84.9
Routing 25 ip filter rules 64.8 786.9 70.4 288.4 60.9 31.2
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Additional Information

Additional Information

Memory N/A
Processor N/A
Featured product N/A
Tags (0) Reviews (0)